hgacbuy-logoinsta color fb blue YT color words

B-12 Chaparral Type 5 Wildland Engine

 IMG 2161a

THE B-12 CHAPPARAL BRUSH TRUCK - TYPE 5 WILDLAND ENGINE

The B-12 is built on a 2 1/2 Ton Stewart Stevenson LMTV 4x4 chassis with a 500 gallon polypropylene tank.

 

Standard features include:

 

      • Body, Welded
        • Material, Premium Structural and Sheet Steel
        • Crosswalk, BATROPS, which complies with SAE J1194 in the seated or standing positions in two (2) "Pump and Roll Fire Attack Operational Areas"
        • Compartment, Tank, Recessed, for a low center of gravity
        • Crosslay, Transverse, 10", in crosswalk area
        • Rear Bumper, 3" x 10" x 1/4" Steel Tube, attached to chassis frame
        • Receiver Tube, Rear Bumper
      • Safety Gate, Chest Saddle, Crosswalk
      • Harness, Body, 4 Point with three (3) retractors per side, six (6) total retractors
      • Tank, Polypropylene, 500 gallon, with sump
      • Water Level Indicator, Tankvision
      • Pump, Rowe RPM2 with Kohler 19hp EFI engine
      • Pump Primer, Hand-Operated
      • Manifold, Discharge, and Steel Plumbing
      • Discharge, Preconnected, 1-1/2" Crosslay
      • Discharge, Preconnected, 1" Whipline in crosswalk
      • Suction, 2-1/2" Pump to Draft, with full port valve
      • Suction, 3" Tank to Pump, with full port valve
      • Pump Panel, Custom, with flip-up lid, located in Crosswalk
      • Trim Package, Bright Aluminum Tread in Crosswalk and Rear Deck
      • Trim Package, Stainless Steel Chip Rails
      • Coating Package, Superliner, on crosslay and rear bumper
      • Coating Package, Corashield, on underbody
      • Mud Flap, behind rear tire
      • Light Bar, Whelen Justice LED (NFPA compliant)
      • Emergency Light, Whelen Linear LED 500 Series,  two (2) per side of bed (driver/passenger) and two (2) rear bumper
      • Stop-Turn/Tail Light, LED
      • Work Light, on Body, LED (add 2 for front bumper)
      • Work Light, on Pump Panel, LED
      • Siren and Speaker
      • Back-up Alarm
      • Enclosure, Electrical Panel, with labels and color-coded wiring located inside under roll bar box (driver's side)
      • Dedicated Ground to the Battery
      • Master Disconnect, Ignition-operated
      • Electrical System, Body
      • Electrical System, Chassis
      • Reflective Striping, 4" on Body and Rear Bumper
      • Reflective Striping, 6" on chassis doors
      • Body Preparation, Sandblast and Prime

 

REQUEST PRICING ON THE B-12 CHAPARRAL BRUSH TRUCK

 

 IMG 2161a

THE B-12 CHAPPARAL BRUSH TRUCK - TYPE 5 WILDLAND ENGINE

The B-12 is built on a 2 1/2 Ton Stewart Stevenson LMTV 4x4 chassis with a 500 gallon polypropylene tank.

 

Standard features include:

 

      • Body, Welded
        • Material, Premium Structural and Sheet Steel
        • Crosswalk, BATROPS, which complies with SAE J1194 in the seated or standing positions in two (2) "Pump and Roll Fire Attack Operational Areas"
        • Compartment, Tank, Recessed, for a low center of gravity
        • Crosslay, Transverse, 10", in crosswalk area
        • Rear Bumper, 3" x 10" x 1/4" Steel Tube, attached to chassis frame
        • Receiver Tube, Rear Bumper
      • Safety Gate, Chest Saddle, Crosswalk
      • Harness, Body, 4 Point with three (3) retractors per side, six (6) total retractors
      • Tank, Polypropylene, 500 gallon, with sump
      • Water Level Indicator, Tankvision
      • Pump, Rowe RPM2 with Kohler 19hp EFI engine
      • Pump Primer, Hand-Operated
      • Manifold, Discharge, and Steel Plumbing
      • Discharge, Preconnected, 1-1/2" Crosslay
      • Discharge, Preconnected, 1" Whipline in crosswalk
      • Suction, 2-1/2" Pump to Draft, with full port valve
      • Suction, 3" Tank to Pump, with full port valve
      • Pump Panel, Custom, with flip-up lid, located in Crosswalk
      • Trim Package, Bright Aluminum Tread in Crosswalk and Rear Deck
      • Trim Package, Stainless Steel Chip Rails
      • Coating Package, Superliner, on crosslay and rear bumper
      • Coating Package, Corashield, on underbody
      • Mud Flap, behind rear tire
      • Light Bar, Whelen Justice LED (NFPA compliant)
      • Emergency Light, Whelen Linear LED 500 Series,  two (2) per side of bed (driver/passenger) and two (2) rear bumper
      • Stop-Turn/Tail Light, LED
      • Work Light, on Body, LED (add 2 for front bumper)
      • Work Light, on Pump Panel, LED
      • Siren and Speaker
      • Back-up Alarm
      • Enclosure, Electrical Panel, with labels and color-coded wiring located inside under roll bar box (driver's side)
      • Dedicated Ground to the Battery
      • Master Disconnect, Ignition-operated
      • Electrical System, Body
      • Electrical System, Chassis
      • Reflective Striping, 4" on Body and Rear Bumper
      • Reflective Striping, 6" on chassis doors
      • Body Preparation, Sandblast and Prime

 

REQUEST PRICING ON THE B-12 CHAPARRAL BRUSH TRUCK

 

B-12 Chaparral Brush Truck Image Gallery

 Blanchat Mfg., Inc.

f logo-overyt logo-over    hgacbuy-logo

 

  • TEL: 1 (620) 896-7145
  • Hours: Mon-Fri  8AM-5PM  CST

© 2014-2016 Blanchat Mfg., Inc.  All Rights Reserved.  |  site design by RMV DesignWorks  |  Login